Mini Hakkero Lasercut Version Front:Received LEDs and came up with hopefully the correct resistors/power arrangement
![](http://i11.photobucket.com/albums/a199/Bobc64/masterspark2/th_IMG_0183.jpg)
![](http://i11.photobucket.com/albums/a199/Bobc64/masterspark2/th_wireleds.jpg)
wireleds
Ahh, cardboard. The poor man's PCB.
![](http://i11.photobucket.com/albums/a199/Bobc64/masterspark2/th_IMG_0184.jpg)
Started poking the LEDs through based on my design while setting up the leads so that they match the circuit.
![](http://i11.photobucket.com/albums/a199/Bobc64/masterspark2/th_IMG_0185.jpg)
![](http://i11.photobucket.com/albums/a199/Bobc64/masterspark2/th_IMG_0188.jpg)
![](http://i11.photobucket.com/albums/a199/Bobc64/masterspark2/th_IMG_0191.jpg)
Started soldering and snipping the leads... hopefully I didn't reverse any of the LEDs :/
![](http://i11.photobucket.com/albums/a199/Bobc64/masterspark2/th_IMG_0192.jpg)
![](http://i11.photobucket.com/albums/a199/Bobc64/masterspark2/th_IMG_0195.jpg)
All the LED wiring is done!! Looks somewhat like a mini-arc reactor....
![](http://i11.photobucket.com/albums/a199/Bobc64/masterspark2/th_IMG_0198.jpg)
Whew, what a mess. I really hope I didn't screw up with the design or with the resistor calculations... de-soldering that is impossible.
Tengu Geta FrontFound a co-worker that is able to lend me a nice tablesaw. It fraking weighs like 400 pounds lolz.
![](http://i11.photobucket.com/albums/a199/Bobc64/geta/th_IMG_0204.jpg)
Gonna try making it out of Pine first... since 3 inch thick pieces of wood is hard to find and pricy to obtain... Will try combining 3 pine studs together first.
![](http://i11.photobucket.com/albums/a199/Bobc64/geta/th_IMG_0209.jpg)
Glue is now dry, so took it to the tablesaw for some squaring, trimming to size, and the a rough-cut set of beveled edges.
Aya Skirt Front:Finished the waistband clasp. The skirt is now FINISHED!
![](http://i11.photobucket.com/albums/a199/Bobc64/skirt/th_IMG_0212.jpg)